DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
Constant temperature and humidity holding tester adhesive tape test
a. Adopt cold balance system, long-term operation does not freeze, to meet the adhesion test of various tapes at different temperatures and humidity;
b. The sink is made of special materials with small thermal conductivity, and the surface will not be attached to the water beads (for example, the surface of the water beads will form metal materials, and it is easy to wet the sample drops, affecting the test effect), and is equipped with a flow guide device, if the internal pressure of the sink is too high or the water level is too high, it will flow into the humidification barrel of the flow guide hole.
c. The machine is exquisite, the internal space is large, the external size is small, the width is only about 78CM, and the laboratory with a single door can be easily entered. d. Pressure relief hole at the top.
2. Product Paramter
| Temperature range | -20ºC~150ºC |
| Humidity range | 20%~98%RH |
| Heating time | -20ºC~+100ºC within 40min (no load) |
| Cooling time | +20ºC~-20ºC within 40min (no load) |
| Control stability | temperature ±1.0ºC, humidity ±1.0%RH |
| Control uniformity | temperature ±2.0ºC, humidity ±3.0%RH |