DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
Photovoltaic Module Testing Machine UV Aging Test Chamber Solar Panel Testing Machine IEC 61215
1. Product Description
Purpose of UV pretreatment tester: The UV aging tester for photovoltaic modules simulates the damage caused by the UV rays in sunlight when the modules are exposed outdoors for a long time. This equipment only takes a few days or weeks to reproduce the anti-UV aging performance of the module-related materials that takes months or years outdoors.
Applicable standards for UV Aging Test Chamber : IEC 61215, IEC 61646 standard requirements
| Materials used | high-quality materials that can completely block ultraviolet rays, have good sealing and thermal insulation propertie |
| Total UV irradiation area of the equipment |
greater than 2000mm×2000mm, meeting the requirements for testing two 2m×1m components at the same tim |
| Light source life |
The system uses a single set of xenon lamps with a life of about 1000 hours. A set of spare parts is provided when the equipment is delivered, with a service life of more than 2000 hours |
| Relative energy ratio of single lamp UVA and UVB |
UVB accounts for about 3% to 10% of the total energ |
| Irradiation intensity |
The irradiation intensity of the wavelength of 280nm to 385nm can reach about 100W/m², 280nm to 320nm <=10%, ensuring that the test cycle is shortened as much as possible |
| Irradiation uniformity | better than ±15 |
| Real-time monitoring and display of UVA and UVB intensity | |
| One UVA (320nm to 385nm) and one UVB (280nm to 320nm) fiber optic probe | |
| Component surface temperatur | 60ºC±5ºC |
| Temperature resolution |
0.1ºC |
| Ozone |
Almost no ozone is generated |
| Lighting method |
top lighting, the component test plane is perpendicular to the light source |
| Touch screen control and real-time monitoring, automatically cut off the light source when the set value is reached | |
| Real-time graphical display of component surface temperature, measurement accuracy ±0.1ºC | |