DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
Lead Terminal Strength Testing Machine Photovoltaic Module Test Machine Tensile Fatigue Test Machine
1. This equipment is mainly used for the attachment of the lead end and the component body, whether the attachment of the lead and the component body can withstand the force in the normal installation and operation process.
Applicable standard: IEC 61215-2:2016 standard requirements
2. Technical specifications
| Component test size | 2000x 1000mm (customizable) |
| Measurement accuracy | ≤3% |
| Configure conventional lead terminal fixture 1. Install surface junction box retention test a. 40N is applied to the center of the box to prevent torque from being applied to the junction box |
|
| Holding time | 10+1sc |
| Force application method | weight |
| Timing method | stopwatch |
| Tension test Use motor to provide power source |
|
| Weight | 30N, 42N, 55N, 70N, 80N, 90N, 100N, 115NC |
| Tension cycle | 1s |
| Number of times | 54 times (settable) |
| Displacement: manual measurement |
|
| Torque test | |
| Force device: servo motor Power supply | 220V 50Hz |
| Power | 400W |
| continuous Output current | 2.6 |
| Arms Feedback resolution | 17-bit (1 60000p/rve) |
| speed control range | 1:5000 |
| output signal | pulse signal |
| test time | 1min (can be set, automatically maintained) |
| automatic display of torque, angle d. touch screen control | |