DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
IEC 61730 Wire tube bending test machine Solar Panel Tester Conduit Bending Testing Machine
1. Product Introduction
Purpose of the wire tube bending test machine: The photovoltaic module wire tube bending test machine uses a certain weight to apply to the wire tube, and then rotates the wire tube at a certain speed to judge the bending and twisting resistance of the photovoltaic module wire tube.
2. Applicable standards for wire tube bending test machine: IEC61730-2: 2004 standard requirements
| Controller setting frequency range | 0~120 Hz |
| When the setting frequency | 60 Hz, the spindle speed is 1 rev./min |
| Spindle speed | N rev./min = frequency Hz / 60 |
| Timing range | 1~9999 seconds |
| The power supply |
single-phase AC220V, and the power consumption is 100W |
Table of weights applicable to the outer diameter of the wire tube
| Wire tube outer diameter (mm) | Applicable counterweight (N) |
| 13 - 25 | 220 |
| 26 - 50 | 330 |
| 51 -100 | 490 |