DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
Horizontal Type Tensile Strength Tester Protective Film Tear Film Voltage Tester
1. Product use
The electrostatic film tear voltage tester is mainly used to determine the voltage value when the protective film is torn off.
2. Features
1. Convenient and safe, can be used for measurement and online transportation in narrow places;
2. Check the compensation voltage of the remover in 1V (ion balance), and display a large and bright LCD screen;
3. Simple operation button, fast and accurate measurement;
4. According to the balance metal plate of the shell, the balance of the ion separator can be detected;
5 When measuring the variable stator, the maximum voltage of the largest form can be detected.
3. Product Parameter
|
Motion control mode |
5-inch touch control |
|
Test angles |
180 degrees |
|
Voltage reading mode |
Infrared voltage tester digital display reading |
|
Signal Detection Method |
Oscillation |
|
Indicates the frequency of data updates |
0.5 seconds at a time |
|
The usual way |
10V~19.99kV I. |
|
Way B |
1V~1999V |
|
Test distance |
30mm (between the measured and detection sections) |
|
Test distance adjustment |
Red LED light focus type (30mm focus distance of light mark) |
|
Head turn angle |
180 degrees (45° handles each) |
|
Representation Department |
Backlight encapsulates LCD display |
|
Polarity indication |
+ Polarity - Polarity indication |
|
Switch mode |
MODE button transition |
|
Battery check |
Indication part remnant indication |
|
power supply |
DC9V alkaline angle type dry battery |
|
Operating temperature |
0~40ºC |
|
Solid size |
68×22×138mm(W×D×H) |
|
weight |
230g (including battery) |
|
fittings |
Dedicated ground wire, 9V battery, box |
|
Measure speed |
100-10000mm/min adjustable |
|
Valid itinerary |
500 mm |
|
Specimen width |
50mm |
|
Downtime mode |
The upper and lower limits are set safely, and the breakpoint of the specimen is sensitized |
|
Motor driven |
Delta servo motor + Delta servo drive |
|
Machine drive |
Ball screw + linear guide |
|
Machine power |
400W |
|
Dimensions of the machine |
1363mm(W)×420mm(D)×850mm(H) |
|
Use a power source |
220V 50Hz |
|
Standard configuration |
A set of fixtures, a power cord, and a manual |
|
remark |
Please note that the oscillation type is very sensitive to shocks such as falling, and should not be used with strong impacts. |