Freezing Point Cold Filter Point Tester Liquids Freezing Point Tester For oil product
- The operating conditions under which the instrument is used
1. The instrument should be placed on a flat and firm workbench, and air convection should be reduced as much as possible in the environment.
2. This product involves flammable materials, and no open flame (or device that produces sparks) is allowed to be close to the surrounding during operation.
3. When the instrument is not in use, it should be placed in a dry and ventilated place.
4. The power supply is a single-phase three-wire system, and there must be a good grounding terminal.
2. Application and applicable scope
The apparatus is in accordance with the standards of peoples Republic of China GB/T510 "pour point of petroleum products - Determination of" peoples Republic of China and the industry standard SH/T0248 "distillate fuel cold filter plugging point determination" and other requirements of the design and manufacturing, according to the provisions of the above two method is applicable to the determination of standard of petroleum products pour point and cold filter plugging point.
| working power supply |
AC220V 10%; 50Hz |
| cold trough temperature |
room temperature to -75 - 0.5 Deg. C |
| the new kind of refrigeration compressor, refrigeration system |
| test hole number |
two holes, two holes isothermal |
| the ambient temperature is less than or equal to 30 DEG C |
| the relative humidity is less than or equal to 85% |
| power consumption |
less than 1000W |
