DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
BS 1006 ISO 105 DIN 54022 JIS L0850 Lroning Sublimation Color Fastness Tester
Introduction
The heat-resistant and sublimation color fastness tester can detect the dimensional stability of fabrics during hot pressing and dry heat treatment, and also test the sublimation color fastness of fabrics. The sample is placed between the upper and lower heating plates, and the temperature of the upper and lower heating plates is accurately controlled by independent controllers. The distance between the heating plates and the weight of the upper test piece are controllable. The test temperature range is 120-230℃, with a timing alarm function to accurately control the sample time.
Meet the standards
ISO 105 X11 P01 BS 1006 AATCC 92 114 117 133 GB/T 5718 6152 DIN 54022 54060 JIS L0879 L0850
Scope of application
This device is a dry heat testing apparatus suitable for heat press color fastness test methods and dry heat color fastness test methods. It can be used for fabric color fastness testing, chlorine damage (resin-treated fabrics), yellowing of bleached fabrics, sublimation color fastness testing of disperse dyes, and water scald fastness testing of reactive dyes.
Technical Specification
|
Experimental hot plate |
Specification W100 × D40mm, aluminum (identical top and bottom) |
|
Temperature Regulation |
Digital temperature controller, minimum display 1°C (one each at the top and bottom) |
|
Timer, sound alarm function |
|
|
Maximum temperature |
250°C |
|
Hot plate surface pressure |
4 ± 1 KPa (40 cm²) |
|
Heaters |
Cylindrical heaters, 100V, 150W (one each at the top and bottom) |
|
Dimensions |
Approximately W250 x D300 x H230mm |