DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
CNS11888 PSTC7 Oven Type Tape Holding Force Test Machine Thermostatic Adhesive Tape Retention Tester
Introduction
The oven-type tape holding force testing machine is used to conduct static load tests on the adhesive force of tapes. It automatically records the time that the tape can maintain under a certain load and temperature. If the tape drops off during the test, the time is recorded to confirm the adhesive duration of the tape and test its adhesive holding time.
Main functions
Cut a 1-inch wide tape into a long strip and stick it onto a specified SUS#304 stainless steel plate. Roll it back and forth three times with a standard 2kg roller at a speed of 300mm per minute. Hang the steel plate on the testing machine and add the specified weights. When the tape falls off the steel plate, the timer automatically retains the test time to evaluate the durability of the tape's adhesion.
Meet the standards
Design standards: GB/T4851, CNS11888, PSTC7
Technical specifications
|
Load capacity |
1kg |
|
Number of test groups |
5 groups, each timed separately |
|
Automatic timer |
1-999,999 minutes or seconds (switchable between min and sec) |
|
Temperature controller |
Room temperature to 200℃, PID control |
|
Temperature display |
0.1℃ |
|
Heating method |
Hot air circulation |
|
Safety device |
Equipped with over-temperature and electric heating overload automatic power-off protection |
|
Machine material |
Inner SUS#304 stainless steel plate; outer high-grade steel plate with paint finish |
|
Inner box size |
85×35×45cm |
|
Overall volume |
137×41×86cm |
|
Weight |
143kg |
|
Power supply |
1 phase, AC220V 19.5A |