DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
JIS L1015 L1095 Single Fiber Static Dynamic Friction Coefficient Measurement Device
Product Introduction
This machine is designed based on JIS L1015 (Chemical Fiber Needle Puncture Test Method (Test Method for Artificial Short Fibers)) and JIS L1095 (General Textile Test Method), and it is capable of accurately and efficiently measuring the friction coefficient.
Measurement features
Compared with testing machines that use torque balance/torsion balance as the testing principle, this one not only can obtain accurate data through extremely simple operation, but also can eliminate the influence of sample manufacturing and operator differences, and has excellent data reproducibility and repeatability. In addition, there is a data processing system specifically used for calculating indicators such as dynamic and static friction coefficients.
Compliant with standards
JIS L1015: Chemical Fiber Pin Test Method (Test Method for Artificial Short Fibers)
JIS L 1095: General Textile Testing Method
Test method
The friction resistance value is expressed with an accuracy of 0.1mg. A small amount of data is calculated based on the individual differences of the tested object.
Compared with the previous torque balance/torsion scale, the dedicated load measurement device with a maximum load of 100,000mg (commonly 100mg) has significant advantages in durability and reproducibility. Moreover, the "automatic 0" button operation is simpler.
The up and down movement of the load measurement part uses a special engine to achieve a very slow movement.
Technical specifications
|
Test item |
IT-FMT |
|
Surface treatment |
Fibers and yarns, dynamic and static friction between fibers |
|
Measurement range |
0.1 - 100.00 mg |
|
Representation method |
Digital method (display on panel and P/C monitor) |
|
Load measurement method |
Special dedicated load sensor method |
|
Sample load |
100 mg (clamp load) |
|
Friction body speed |
0 r.p.m. (0 mm/min.), 0.8 r.p.m. (20 mm/min.), 12 r.p.m. (300 mm/min.), 36 r.p.m. (900 mm/min.), 120 r.p.m. (3000 mm/min.), 180 r.p.m. (4500 mm/min.), 720 r.p.m. (18000 mm/min.) |
|
Friction body types |
Fibers, yarns, yarn rolls, yarn rollers |
|
Friction body rotation device |
Rollers X-Y with micro-motors |
|
Load measurement part movement |
Up and down movement (switch between micro-speed & medium-speed modes) / Remote control |
|
Test data items |
Actual test values (mg) of each sample for each test, friction coefficient, actual test value & friction coefficient /average, standard deviation, CV%, Max., Min. |
|
Size and weight |
650W × 500D × 660mm, approximately 50kg (including P/C data processing part) |
|
Power supply |
Single-phase AC 100V, 50/60Hz |