DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
FZ/T-T50004 Fiber Thermal Shrinkage Tester Chemical Fibers And Natural Fibers Heat Shrinkage Meter
Main uses
It is used to measure the thermal shrinkage rate of various chemical fibers and natural fibers after dry heat, high-temperature steam and boiling water treatment.
Meet the standards
GB/T6505-1986; FZ/T-T50004-1991
Features of the instrument
This instrument adopts automatic control and data processing technology. It is suitable for measuring the thermal shrinkage rate of fibers ranging from 0.89 to 16.65 dtex. The entire testing process is automated, and it automatically screens out outliers in the test results. It can test up to two sample tubes at a time, with a maximum of 30 samples per tube. The number of sample tubes and the number of samples per tube can be freely set. The instrument automatically distinguishes the tube numbers, ensuring that the post-drying and pre-drying data correspond, and can also perform post-drying breakage judgment. The instrument automatically counts and processes data. It can display and print out the shrinkage rate single value, average value, extreme value, CV value, and the number of valid test samples on a computer. This instrument has high resolution, stable performance, a high degree of automation, and is easy to operate.
Technical specifications
|
Thermal shrinkage measurement range |
0~25% |
|
Measurement accuracy |
±0.01mm |
|
Measurement error of thermal shrinkage rate |
≤ ±0.1% |
|
Spacing between upper and lower clamping devices |
20mm ± 1mm |
|
Number of roots that can be tested by the cylindrical frame |
35 roots |
|
Pre-tensioning clamp quality error |
≤ 10% |
|
Power Supply |
AC 220V 50Hz 500W |