DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
ISO 22650 Shoe Heel Testing Machine Leather Shoes Heel Bonding Tester
Usage Instructions
The heel bonding testing machine for leather shoes is suitable for leather shoes where the heel is bonded or nailed to the rear upper or the outsole. It is not applicable to molded-bottom leather shoes where the heel and the outsole are integrated as one piece.
Working principle
The process involves mounting the leather shoes on a special fixture and then stretching them on a tensile testing machine at a certain speed until the heel separates from the rear upper or the outsole. The force required for this is the heel bonding force being tested. The sample used in the test is the fully formed leather shoe after 48 hours of production. The test area must have no obvious defects, the heel must not have been compressed, impacted, or deformed, and there must be no significant deformation.
Meet the standards
GB/T 3903.25, ISO 22650
Technical specifications
|
Maximum load |
500 kg |
|
Load decomposition degree |
1/1000 |
|
Accuracy |
±1% |
|
Speed range |
25 - 300 mm/min (also available with a 1 - 500 mm/min adjustable option) |
|
Stretching speed |
25 ± 2 mm/min |
|
Unit conversion |
kg, N, lb |
|
Maximum travel of the test |
850mm |
|
Display mode |
Controller direct display |
|
Power |
AC motor (servo motor can also be customized) |
|
Speed control method |
Knob |
|
Shutting-down methods |
Lower limit safety setting, emergency stop button, overload shutdown, elongation setting, specimen failure detection shutdown |
|
Standard configuration |
1 sensor; One pair of standard heel clamping fixtures |