JB-300B Charpy Pendulum Impact Strength Tester/Metallic Materials Charpy Notch Impact Tester

JB-300B Charpy Pendulum Impact Strength Tester/Metallic Materials Charpy Notch Impact Tester

JB-300B Impact testing machine is used for the determination of metal materials under dynamic load impact resistance performance, to determine the quality of the material under dynamic load conditions.

This machine is semi-automatic control testing machine, the operation is simple and high efficiency, Yang pendulum is, impact, electrical control, and can use the surplus energy of thrust sample after automatic Yang place ready for the next test, especially for continuous do impact test impact test lab and a lot of metallurgy, machinery manufacturing andother industries.KJ-300B Impact testing machine in accordance with GB/T3808-2002 inspection of the pendulum impact tester, according to the national standard GB/T229-2007 metal materials Charpy impact pendulum impact test was carried out on the metal material test method ".

JB-300B Charpy Pendulum Impact Strength Tester/Metallic Materials Charpy Notch Impact Tester

Technical feature:

1.Host machine for single supporting pillar type structure, cantilever hang put way, pendulum hammer body type C;

2.Impact knife adopts screw fixed installation, change of easy and convenient.

3.Sample beam type bearing

4.Host is equipped with safety pins, and equipped with a security fence.

5.Tester for semi-automatic control, Yang place, hanging pendulum, the shock, put the pendulum are electrical control, and can use the surplus energy of thrust sample after automatic Yang pendulum is ready for the next test, especially for continuous do impact test impact test lab and a lot of metallurgy, machinery manufacturing and other departments.

6.Testing machine in accordance with GB/T3803-2002 inspection of the pendulum impact tester, according to the national standard GB/T229-2007 metal materials Charpy impact pendulum impact test was carried out on the metal material test method"

JB-300B Charpy Pendulum Impact Strength Tester/Metallic Materials Charpy Notch Impact Tester

Specification:

1,Impact Energy:300J 150J

2,Impact speed:5.2m/s

3,Pendulum pre Yang Angle:150°

4,The sample bearing span:40mm

5,The pedestal jaw with rounded corners:R1.0~1.5mm

6,Impact blade rounded corners:R2.0~2.5mm ( R8mm)

7,Pendulum impact center to some distance:750mm

8,Standard sample size:10×10(7.5 or 5)×55mm

9,moment of pendulum : M=160.7695N.m 80.3848N.m

10,Power supply and power: three phase four wire

50Hz 380V 250W

11,dimension:2200×650×1900mm

12,Accuracy of Angle: 0.1°

13,Weight: about 500Kg

JB-300B Charpy Pendulum Impact Strength Tester/Metallic Materials Charpy Notch Impact Tester

Main equipment configuration: