DONGGUAN LONROY EQUIPMENT CO LTD
DONGGUAN LONROY EQUIPMENT CO LTD
Add to Cart
Fully Automatic Concrete Specimen Geometric Deviation Measuring Instrument Laboratory Geometric Deviation Testing Machine
Product Introduction
The fully automatic concrete specimen geometric deviation measuring instrument was developed and manufactured by our company in accordance with the GB/T 50081 "Test Methods for Physical and Mechanical Properties of Concrete." This instrument is primarily used to measure the length, width, and height dimensions of standard concrete specimens, the angles between adjacent surfaces, and the flatness of the compressive bearing surface. The instrument automatically scans and generates reports with one click.
Product Features
1. Fully automatic scanning, automatic test result and report generation. The entire testing process is automated, allowing for unsupervised testing.
2. No marking points are required during the scanning process, and the results are automatically stitched together.
3. Fast testing time: scanning and calculations take only 15 seconds.
4. Accurate and reliable data, minimally affected by external conditions, resulting in accurate test results with high repeatability. Suitable for both laboratory and production measurements.
5. Excellent appearance quality, high mechanical strength, and corrosion resistance.
PFully Automatic Concrete Specimen Geometric Deviation Measuring Instrument Laboratory Geometric Deviation Testing Machine
Technical Specification
|
Resolution |
0.01 mm |
|
Length Measurement Accuracy |
≤±0.05 mm |
|
Adjacent Surface Angle Resolution |
0.02° |
|
Adjacent Surface Angle Measurement Accuracy |
≤±0.1° |
|
Flatness Resolution |
0.01 mm |
|
Flatness Accuracy |
≤±0.0005 of the side length |
|
Specimen Dimensions |
100×100×100 mm, 150×150×150 mm |
|
Acquisition Speed |
≤0.1 s |
|
Measurement Time |
15 s |
|
Detection Light Source |
Blue LED |
|
Power Supply Voltage |
AC 220V±10% |
